How Can I Connect a Mac® M1/M2/M3 to BenQ Designer Monitors? [Updated]

Since Apple began to incorporate their proprietary M1/M2 chip design into their products, we at BenQ have received a significant number of inquiries and questions concerning the compatibility of our monitors with these new M1 and M2 based apple products. People are wondered about connectivity between an M1 and M2 based Mac devices and their BenQ monitors and the different ways that can be accomplished. We're here to discuss the most frequently asked questions about connected your M1 and M2 based Mac devices to your favorite BenQ design or photo editing monitor.

If you are unable to find an answer to your question and would like assistance with your BenQ product - please reach out to us at BenQ Support. Set up a quick live chat and get your questions answered right away.

Yes. We strongly recommend connecting BenQ monitors to Mac M1/M2/M3 directly via HDMI or Thunderbolt 3/4 (USB-C) in order to maintain consistent performance.

BenQ has a series of monitors that support M1, M2 OR M3 based Mac Mini and MacBook Pro laptops, so you can select one of those to achieve the connectivity you need.

The new M1/M2/M3 CPU platform from Apple may cause the resolution and refresh rate to be limited to 4K 30Hz when connected via USB-C. In order to fix this compatibility issue, new firmware was released for the monitor, so please make sure to update. Other connections such as DisplayPort and HDMI do not have this issue.  

Again, the resolution and refresh rate being limited to 4K 30Hz results from a compatibility issue limited to USB-C when connected to an M1, M2, and M3 based device. A new firmware version is available to resolve this issue, which doesn't affect DisplayPort and HDMI.  

Apple M1/M2 devices with Thunderbolt 3/4 connections to monitors may exhibit a resolution and refresh rate lock to 4K 30Hz. Make sure you have MacOS 11.5 or a later version installed with all the newest updates to resolve this issue, which is caused by an out of date operating system version. 

If there's any further question concerning this issue, please contact BenQ Support.

If your BenQ monitor uses HDMI, DisplayPort, and Mini DisplayPort for video input, it will work with any properly-certified and made USB-C to DisplayPort or HDMI adapters. But in order to get the best experience, we suggest you buy Thunderbolt 3/4 (or USB-C Alt Mode) compatible monitors. BenQ cannot vouch for the quality or performance of third party adapters.

Yes, both the newly-released PMU and PME work on Apple M1/M2/M3 devices via Rosetta 2. Download the latest PMU and PME versions from our official site. palette-master-element.html

BenQ DesignVue PD series designer monitors currently support the Apple M1, M2, and M3 based devices natively when using our Display Pilot software with version 1.0.9.5 or later. However, Some Mac devices cannot sync with our PD series monitors when using the HDMI port. Thus, we recommend connecting the monitor via the Thunderbolt 3/4 (USB-C) cable or USB-C to DisplayPort cable when using Display Pilot/Display Pilot 2 as part of your workflow.

The table below shows detailed information about the compatibility of DisplayPilot and different Mac devices. 

Please download the latest version of Display Pilot and other drivers & software here: Download.

Yes, Eye-CareU works on Apple M1, M2, and M3 based devices. However, Some Mac devices cannot sync with the monitors when using the HDMI port. Thus, we recommend connecting the monitor via the Thunderbolt 3/4 (USB-C) cable or USB-C to DisplayPort cable when using Eye-CareU. The table below shows detailed information about the compatibility of Eye-CareU and different Mac devices. 

*M1, M2, and M3 Mac devices don't support multiple monitors, except for the Macbook Air M3 with laptop lid closed.
Please download the latest version of Eye-CareU and other drivers & software here: Download.

Display Pilot & Display Pilot 2: When using the latest Display Pilot version, BenQ DesignVue PD series monitors natively support the Apple M1/M2/M3 platform and do not require the installation of Rosetta virtualization and emulation software. 

PMU (Palette Master Ultimate), PME (Palette Master Element), and PCS (Paper Color Sync) support M1/M2 devices via Rosetta 2, so users will need to install Rosetta 2 if not installed yet. This does not affect normal usage.

For more detail, please refer to the Apple FAQ link :

https://support.apple.com/en-us/HT211861