Search history
Clear
WDC10C InstaShow USB-C Wireless Presentation Device
Instant Visual Communication and Collaboration for Modern Enterprises
Application
What type of USB-C port is compatible with InstaShow USB-C button for wireless presentation?
Can I use mobile phones with DP Alt Mode to operate Type-C button of this model?
It is not recommended to use mobile phones with DP Alt Mode to operate the Type-C button of this model. The Type-C button operation requires the power consumption up to 900mA that may not be supported by every mobile phone.
Learn more
Does the firmware version of transmit button and receiver host have to be the same?
It is necessary to keep transmit button and receiver host with the same firmware version. If not, the system to be crashed.
Learn more
Which mode should I select for fluent image playing when displaying content like video?
Please select "Video Mode".
Learn more
Which mode should I select for sharp image when displaying content like PPT?
Please select "Presentation Mode".
Learn more
Why does the screen show Error Code: 006 when I try to pair my InstaShow Button with the Host?
Error Code: 006 means that InstaShow Button and Host which you are trying to pair are not with the same Wi-Fi Area setting. Please contact BenQ local service center for support.
Learn more
How to check Wi-Fi Area setting of InstaShow Button?
InstaShow Host and Button have the same Wi-Fi area setting so they should be paired successfully. Thus, to check Wi-Fi Area setting of InstaShow Button, please check the Wi-Fi Area setting of InstaShow Host.
Learn more
How to check the Wi-Fi Area setting of InstaShow Host?
Please enter Web Management and click "Information" on the left. You will see the setting of Wi-Fi Area on the bottom of the page.
Learn more
How to wake up InstaShow Host (RX) from HDMI Standby Mode?
Please wake up InstaShow Host in one of the following two ways:
- Turn on the display device.
- Press Power button of Host (RX). Learn more
- Turn on the display device.
- Press Power button of Host (RX). Learn more
Can 14 kits of InstaShow be used in 14 meeting rooms nearby?
Yes, all InstaShow sets are paired differently, so TX in room A will not display to RX in room B. However, if all 14 pcs RX are playing 1080p video under 5G 802.11ac at the same channel, lagging issue may take place.
Learn more
Can I use InstaShow purchased from the U.S. in Europe?
Sorry but no.
InstaShow can only be used in regions of the same Wi-Fi Area but Wi-Fi areas of the U.S. and Europe are different according to the regulation.
Can I use InstaShow/InstaShow S for 10-12 hours per day?
Yes, you can.
Does BenQ InstaShow/InstaShow S support Mac extended mode?
Yes. BenQ InstaShow/InstaShow S support Mac extended mode.
How to change the sound coming from a laptop to the projector’s speakers while playing video through the InstaShow/InstaShow S on a projector?
Please adjust the setting of laptop audio to "HDMI output". Windows OS will record your previous audio output as default. Thus, you only need to re-appoint it to "HDMI output".
Learn more
If I buy an InstaShow in one country, can I use it in another country?
Is InstaShow/InstaShow S compliant with HDCP?
Yes, InstaShow/InstaShow S is compliant with HDCP. When HDCP content is shared with InstaShow/InstaShow S, the HDCP content will be shown on the HDMI-compliant digital displays.
Learn more
What is the maximum length of HDMI cable to use on InstaShow ?
It is suggested to use a HDMI cable with maximum length of 3 meters on InstaShow/InstaShow S.
Learn more
What is the maximum workable distance between the button and the Host?
The maximum workable distance is listed below:
WDC10 series: 8 meters
WDC20 series: 15 meters
WDC30 series: 30 meters
VS20: 20 meters
Learn more
Will the performance of InstaShow/InstaShow S be impacted if my PC is outdated?
No. InstaShow/InstaShow S does not use any software or share PC's CPU resource. Therefore, InstaShow/InstaShow S performs well regardless of the performance of your PC.
Learn more
How to adjust the resolution of Windows laptop that is changed when connected with InstaShow?
Please select "Display" and adjust "Scaling" on the graphics card to adjust the resolution.
Learn more
Specification
Does the InstaShow series include Apache Log4j or Java Script Log4j support in its firmware design?
No, InstaShow series firmware designs do not include Apache Log4j or Java Script Log4j support.
Learn more
Does InstaShow/InstaShow S support 3D content?
No, InstaShow/InstaShow S does not support 3D content.
Learn more
Does BenQ InstaShow/InstaShow S support Windows extended mode?
Yes, BenQ InstaShow/InstaShow S supports Windows extended mode.
Learn more
What is the power consumption that InstaShow Button needs from the USB port?
5V/0.9A
Learn more
What kind of wireless does InstaShow use?
IEEE 802.11ac, 5GHz, 2T2R.
Learn more
What is the maximum resolution supported by InstaShow?
The maximum resolution supported by InstaShow is 1920x1080 at 60Hz. Please refer to user manual for more information about supported resolution and refresh rates.
Learn more
Can InstaShow Host receive and display images from two buttons at the same time?
No, InstaShow Host receives and displays images from only one button at a time.
Learn more
What is the resolution displayed when InstaShow Host is waiting for connection?
The resolution displayed is 720p (1280x720) at 60Hz.
Learn more
What is the difference between InstaShow Type-C and Barco Type-C?
InstaShow uses USB Type-C Alternative mode for display output while Barco Type-C is a USB mass storage designed for data transmission.
Learn moreExplanation
What is the benefit of turning on HDMI Standby Mode?
What is HDMI standby mode?
Further Query
Does the InstaShow series include Apache Log4j or Java Script Log4j support in its firmware design?
No, InstaShow series firmware designs do not include Apache Log4j or Java Script Log4j support.
Learn more
Does InstaShow/InstaShow S support 3D content?
No, InstaShow/InstaShow S does not support 3D content.
Learn more
Does BenQ InstaShow/InstaShow S support Windows extended mode?
Yes, BenQ InstaShow/InstaShow S supports Windows extended mode.
Learn more
What is the power consumption that InstaShow Button needs from the USB port?
5V/0.9A
Learn more
What kind of wireless does InstaShow use?
IEEE 802.11ac, 5GHz, 2T2R.
Learn more
What is the maximum resolution supported by InstaShow?
The maximum resolution supported by InstaShow is 1920x1080 at 60Hz. Please refer to user manual for more information about supported resolution and refresh rates.
Learn more
Can InstaShow Host receive and display images from two buttons at the same time?
No, InstaShow Host receives and displays images from only one button at a time.
Learn more
What is the resolution displayed when InstaShow Host is waiting for connection?
The resolution displayed is 720p (1280x720) at 60Hz.
Learn more
What is the difference between InstaShow Type-C and Barco Type-C?
InstaShow uses USB Type-C Alternative mode for display output while Barco Type-C is a USB mass storage designed for data transmission.
Learn more
How to resolve the connection issue and blinking LED indicator that took place after upgrading the firmware and driver for the button and host?
Please try the following:
1. Turn off the power of the host and button, and then turn them on.
2. Resync. the button to the host again by pressing the hardware buttons on them.
Learn more
How to troubleshoot InstaShow Button that does not seem to connect to InstaShow Host.
Please follow the below steps to test if the InstaShow Button is faulty:
(1) Power off the InstaShow Host
(2) Connect the InstaShow Button to a USB 3.0 port of your PC or notebook computer. Do not connect HDMI. Only connect to USB 3.0.
Please wait for a few seconds and note the LED indicator on the InstaShow Button.
- If LED indicator is flashing in red, it means the InstaShow Button is working normally. Thus, the issue may be a failed connection. Please refer to the troubleshooting section of the User Manual for more detail on how to deal with failed display.
- If LED indicator keeps solid red, it means the InstaShow Button is likely to be defective. Please contact a BenQ Authorised Service Provider for further assistance. Learn more
(1) Power off the InstaShow Host
(2) Connect the InstaShow Button to a USB 3.0 port of your PC or notebook computer. Do not connect HDMI. Only connect to USB 3.0.
Please wait for a few seconds and note the LED indicator on the InstaShow Button.
- If LED indicator is flashing in red, it means the InstaShow Button is working normally. Thus, the issue may be a failed connection. Please refer to the troubleshooting section of the User Manual for more detail on how to deal with failed display.
- If LED indicator keeps solid red, it means the InstaShow Button is likely to be defective. Please contact a BenQ Authorised Service Provider for further assistance. Learn more
How to fix the screen that becomes grey when displaying laptop's image through InstaShow?
Please check first if laptop's display has been set as "Extend screen" or "Duplicate screen."
Learn more
How to fix my laptop that supports Win10 compatible wireless display but cannot connect with InstaShow?
This is limitation of Win10. Same result will happen randomly if you use HDMI cable to connect your Win10 laptop with other device directly (projector, IFP, etc.). This issue is not related to InstaShow.
Learn more
How to fix the strange display output resolution when the laptop is in clone mode?
Please follow below steps to solve the issue:
(1) Enter "Advance Setting" page in RX Web Management.
(2) In "EDID Management" row, select "Off".
(3) Trigger reset pin at the bottom of TX button to restore to the default EDID. The Host will stop using SmartEDID function to configure EDID of laptop. Learn more
(1) Enter "Advance Setting" page in RX Web Management.
(2) In "EDID Management" row, select "Off".
(3) Trigger reset pin at the bottom of TX button to restore to the default EDID. The Host will stop using SmartEDID function to configure EDID of laptop. Learn more
How to fix the signal loss that occurred after 5~10 minutes in Video Mode when using InstaShow?
Please use the 5V/1.5Apower adapter to resolve signal loss.
Learn more
How can I make sure whether it is safe when the device in use is hot?
The approved environment temperature range for InstaShow/ InstaShow S in operation is 0~40 °C. The upper temperature limit of InstaShow/ InstaShow S TX and RX ambient is 95 °C.
When the environment temperature is 40 °C, the measured temperature of WDC10 RX should be under 63 °C and that of InstaShow/ InstaShow S TX should be under 51.2°C, according to the regulation compliance. Please refer to the user manual for the suggested temperature range for safe use. Learn more
When the environment temperature is 40 °C, the measured temperature of WDC10 RX should be under 63 °C and that of InstaShow/ InstaShow S TX should be under 51.2°C, according to the regulation compliance. Please refer to the user manual for the suggested temperature range for safe use. Learn more
How to fix the screen that shows "HDMI Searching" when it's displaying laptop's image through InstaShow/InstaShow S?
Please check if the display of laptop has been set to "Extend screen" or "Duplicate screen".
Learn more
The button is unstable or not waking up if the laptop goes into sleep mode. How could I do to fix it?
The problem is related to the fact that in the battery plan, most of the laptop components deactivate when not used for a certain time. Please follow below steps to fix this problem.
(1) Adjust the power plan so that the USB does not deactivate while running on battery
(2) Unplug and plug TX
Learn more
How to adjust the resolution of Windows laptop that is changed when connected with InstaShow?
Please select "Display" and adjust "Scaling" on the graphics card to adjust the resolution.
Learn more
How to fix the screen that shows "HDMI Searching" when it's displaying laptop's image through InstaShow/InstaShow S?
Please check if the display of laptop has been set to "Extend screen" or "Duplicate screen".
Learn more
How can I make sure whether it is safe when the device in use is hot?
The approved environment temperature range for WDC10 InstaShow/ InstaShow S in operation is 0~40 °C. The upper temperature limit of InstaShow/ InstaShow S TX and RX ambient is 95 °C.
When the environment temperature is 40 °C, the measured temperature of WDC10 RX should be under 63 °C and that of InstaShow/ InstaShow S TX should be under 51.2°C, according to the regulation compliance. Please refer to the user manual for the suggested temperature range for safe use.
Learn more
What is the benefit of turning on HDMI Standby Mode?
What is HDMI standby mode?
What type of USB-C port is compatible with InstaShow USB-C button for wireless presentation?
Can I use mobile phones with DP Alt Mode to operate Type-C button of this model?
It is not recommended to use mobile phones with DP Alt Mode to operate the Type-C button of this model. The Type-C button operation requires the power consumption up to 900mA that may not be supported by every mobile phone.
Learn more
Does the firmware version of transmit button and receiver host have to be the same?
It is necessary to keep transmit button and receiver host with the same firmware version. If not, the system to be crashed.
Learn more
Which mode should I select for fluent image playing when displaying content like video?
Please select "Video Mode".
Learn more
Which mode should I select for sharp image when displaying content like PPT?
Please select "Presentation Mode".
Learn more
Why does the screen show Error Code: 006 when I try to pair my InstaShow Button with the Host?
Error Code: 006 means that InstaShow Button and Host which you are trying to pair are not with the same Wi-Fi Area setting. Please contact BenQ local service center for support.
Learn more
How to check Wi-Fi Area setting of InstaShow Button?
InstaShow Host and Button have the same Wi-Fi area setting so they should be paired successfully. Thus, to check Wi-Fi Area setting of InstaShow Button, please check the Wi-Fi Area setting of InstaShow Host.
Learn more
How to check the Wi-Fi Area setting of InstaShow Host?
Please enter Web Management and click "Information" on the left. You will see the setting of Wi-Fi Area on the bottom of the page.
Learn more
How to wake up InstaShow Host (RX) from HDMI Standby Mode?
Please wake up InstaShow Host in one of the following two ways:
- Turn on the display device.
- Press Power button of Host (RX). Learn more
- Turn on the display device.
- Press Power button of Host (RX). Learn more
Can 14 kits of InstaShow be used in 14 meeting rooms nearby?
Yes, all InstaShow sets are paired differently, so TX in room A will not display to RX in room B. However, if all 14 pcs RX are playing 1080p video under 5G 802.11ac at the same channel, lagging issue may take place.
Learn more
Can I use InstaShow purchased from the U.S. in Europe?
Sorry but no.
InstaShow can only be used in regions of the same Wi-Fi Area but Wi-Fi areas of the U.S. and Europe are different according to the regulation.
Can I use InstaShow/InstaShow S for 10-12 hours per day?
Yes, you can.
Does BenQ InstaShow/InstaShow S support Mac extended mode?
Yes. BenQ InstaShow/InstaShow S support Mac extended mode.
How to change the sound coming from a laptop to the projector’s speakers while playing video through the InstaShow/InstaShow S on a projector?
Please adjust the setting of laptop audio to "HDMI output". Windows OS will record your previous audio output as default. Thus, you only need to re-appoint it to "HDMI output".
Learn more
If I buy an InstaShow in one country, can I use it in another country?
Is InstaShow/InstaShow S compliant with HDCP?
Yes, InstaShow/InstaShow S is compliant with HDCP. When HDCP content is shared with InstaShow/InstaShow S, the HDCP content will be shown on the HDMI-compliant digital displays.
Learn more
What is the maximum length of HDMI cable to use on InstaShow ?
It is suggested to use a HDMI cable with maximum length of 3 meters on InstaShow/InstaShow S.
Learn more
What is the maximum workable distance between the button and the Host?
The maximum workable distance is listed below:
WDC10 series: 8 meters
WDC20 series: 15 meters
WDC30 series: 30 meters
VS20: 20 meters
Learn more
Will the performance of InstaShow/InstaShow S be impacted if my PC is outdated?
No. InstaShow/InstaShow S does not use any software or share PC's CPU resource. Therefore, InstaShow/InstaShow S performs well regardless of the performance of your PC.
Learn more
How to adjust the resolution of Windows laptop that is changed when connected with InstaShow?
Please select "Display" and adjust "Scaling" on the graphics card to adjust the resolution.
Learn more
TOP